ALUBE-500 out lasts most conventional greases. Its active ingredient, moly, actually "plates out" on the metal surfaces to reduce friction and extend the lubrication cycle. It resists most acids, weather, dirt, water, steam and oxidation. ALUBE-500 performs at a wide variety of temperatures up to 550°F, and it has high shock and impact resistance. It has a 65 Timken Load and exceptional adhesive and cohesive properties, and it contains special corrosion and rust inhibitors. ALUBE-500 is recommended for use on plain and anti-friction bearings, sleeve bearings, universal joints, water pumps, drive shafts, splines and conveyors. It may be used by fleet operators, construction firms, mills and factories, industrial facilities, bottling plants, paper mills, asphalt plants, mining companies, port authorities, marinas and coal storage facilities.

ATCO-SIL II is a pure non-staining, super dry, heavy-duty, multi-purpose silicone lubricant. It is safe for use on almost any surface. It reduces friction and annoying squeaks in hinges, latches, springs, gears and other mechanisms. The high silicone formula is excellent for use to prevent corrosion on metal, to reduce friction and wear, and to quiet moving parts. ATCO-SIL II provides a water and weather-resistant barrier that protects surfaces from corrosion and wear. It is virtually odorless and colorless when dry. ATCO-SIL II is NSF H1 Registered and may be used with equipment for incidental food contact.

BLANCO MAX II is a NSF® registered white food grade, non-toxic grease. It is specifically formulated for use in food processing plants, meat and poultry plants, bottling companies and canneries where there is a chance of incidental food contact or exposure to edible products. Because BLANCO MAX II is non-staining, it may also be used in textile mills. BLANCO MAX II adheres to metal surfaces and provides continuous lubrication and protection. It is highly resistant to bleed or wear under extreme pressure loads and resists water wash-out and cleaning compounds. It also contains anti-corrosion additives to prevent rusting and provides trouble free performance at temperatures from 0°F to 450°F.

CHAMP is a non-flammable aerosol that stops and prevents corrosion. It may be used to lubricate locks and hinges, snow removal equipment and refrigeration equipment. CHAMP may be applied to wet or dry surfaces. It loosens dirt, scale and other types of corrosion. CHAMP also frees nuts and bolts, stops corrosion on battery terminals and may be used on electrical panel boards, parking meters, home workshops and outboard motors. CHAMP lubricates all moving parts, and it never becomes dry, hard or brittle. CHAMP is recommended for use on airplanes, automotive vehicles, farm equipment, vending machines, laundry equipment, electrical equipment, motors and windings, controls, terminals, fuse and junction boxes, ignition systems, starter motors, distributor caps, spark plugs, alternators, multiple connections, switches and switch gears. It is ideal for use on materials such as steel, copper, aluminum, iron, brass, painted surfaces, bronze, plastics, ceramics, tools and machinery. (Not to be sold in Canada)

COOL CUT Foaming Penetrant & Cutting Oil provides effective lubrication in a variety of metal-working applications. This fast penetrating product lubricates, displaces moisture, frees sticking parts, stops squeaks, prevents rust and corrosion and provides long-lasting protection on all application areas. COOL CUT is ideal for machining carbon alloys, stainless steel, chrome, bronze, aluminum & magnesium. This product is designed for use on farm equipment, sports equipment, industrial equipment and marine and auto equipment.

DAUNTLESS high speed chain and cable lubricant with moly is specially designed to provide maximum protection to wire ropes and chains of all types. This product will completely penetrate into the strands of wire ropes providing the ultimate in lubrication. DAUNTLESS will not build up on chains to attract dust or dirt, but will provide complete lubrication on rollers, pins and bushings. Continued use of this product reduces chain whip, vibration and noise and also protects against galling, seizing and wear, adding life to chains, cables and sprockets.

 

DISPEL is a moisture and corrosion inhibitor. It displaces moisture and prevents corrosion under severe operating conditions. This product contains a highly active blend of solvents and lubricants designed to penetrate, protect and preserve. DISPEL may be used anywhere moisture and humidity causes problems for electrical equipment. (Not to be sold in California)

EG-90 is an all-weather, multi-purpose lubricant that penetrates like an oil, then cures to a thick, water-resistant grease. EG-90 is heat stable to 350°F and prevents rust on applied areas. It may be used by industrial facilities, marine, aircraft and automotive industries, municipalities, farms and office complexes. It may be used on auto doors, hood and trunk lids, gears, chains, sprockets, linkages, slides, bearings, hinges, cranks, pistons and overhead door tracks and rollers.

EVER-REDDIE is an all purpose, non-melt red grease specially formulated with extreme pressure and anti-wear additives to provide heavy-duty service. This grease is able to withstand heavy shock load and has a 65 Timken load and an NLGL rating of 2. EVER-REDDIE has excellent adhesive and cohesive properties and resists most acids, weather elements, dirt, salt-spray, steam and oxidation. It also protects equipment indoors and outdoors, even under high temperature and heavy load environments.

EVER-REDDIE is an all purpose, non-melt red grease specially formulated with extreme pressure and anti-wear additives to provide heavy-duty service. This grease is able to withstand heavy shock load and has a 65 Timken load and an NLGL rating of 2. EVER-REDDIE has excellent adhesive and cohesive properties and resists most acids, weather elements, dirt, salt-spray, steam and oxidation. It also protects equipment indoors and outdoors, even under high temperature and heavy load environments.

E-Z DOES IT is a special multi-purpose product designed to lubricate, penetrate, displace moisture and prevent corrosion. It is not only an excellent penetrant and extreme pressure lubricant, but it also offers superior protection for equipment and machinery from rust and corrosion due to damp and humid environments.

E-Z DOES IT is a special multi-purpose product designed to lubricate, penetrate, displace moisture and prevent corrosion. It is not only an excellent penetrant and extreme pressure lubricant, but it also offers superior protection for equipment and machinery from rust and corrosion due to damp and humid environments.

G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. G.O. climbs to upper and middle gears and bearings, so there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation which reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations). It may be used for all-purpose lubrication for transmissions (not automatic) and differentials in all cars, trucks, tractors and other industrial and agricultural vehicles.

G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. G.O. climbs to upper and middle gears and bearings, so there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation which reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations). It may be used for all-purpose lubrication for transmissions (not automatic) and differentials in all cars, trucks, tractors and other industrial and agricultural vehicles.

G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. G.O. climbs to upper and middle gears and bearings, so there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation which reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations). It may be used for all-purpose lubrication for transmissions (not automatic) and differentials in all cars, trucks, tractors and other industrial and agricultural vehicles.

G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. G.O. climbs to upper and middle gears and bearings, so there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation which reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations). It may be used for all-purpose lubrication for transmissions (not automatic) and differentials in all cars, trucks, tractors and other industrial and agricultural vehicles.

G-MAX adheres to metal against the strongest water-washing action. It will not breakdown and separate in the presence of water. G-MAX resists emulsifying and will not wash out of bearings. It was developed to withstand a 75 Timken OK load and to protect heavy-duty equipment and machinery that often operates under boundary conditions. G-MAX is stable to 525°F and contains special rust and corrosion inhibitors to fight this costly destroyer of equipment. It is a premium, extreme-pressure lubricant for ball and roller bearings, wheel bearings, universal joints, chassis or other areas where grease is subjected to heavy loads and extreme pressure for long periods of time.

G-MAX adheres to metal against the strongest water-washing action. It will not breakdown and separate in the presence of water. G-MAX resists emulsifying and will not wash out of bearings. It was developed to withstand a 75 Timken OK load and to protect heavy-duty equipment and machinery that often operates under boundary conditions. G-MAX is stable to 525°F and contains special rust and corrosion inhibitors to fight this costly destroyer of equipment. It is a premium, extreme-pressure lubricant for ball and roller bearings, wheel bearings, universal joints, chassis or other areas where grease is subjected to heavy loads and extreme pressure for long periods of time.

GOLLY-MOLY is an extreme conditions lubricant that withstands temperature ranges from -40°F to +662°F.  It can resist pressures up to 250,000 psi. This dry film coating will not attract dirt or dust. GOLLY-MOLY is inert to water, oil, alkalis and many acids.  It contains pure Molybdenum Disulfide micro-particles which burnish themselves into metal surfaces and provide a bonded dry lubricating film.

I.G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. I.G.O. climbs to upper and middle gears and bearings, there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation and reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. I.G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations).

G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. G.O. climbs to upper and middle gears and bearings, so there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation which reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations). It may be used for all-purpose lubrication for transmissions (not automatic) and differentials in all cars, trucks, tractors and other industrial and agricultural vehicles.

I.G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. I.G.O. climbs to upper and middle gears and bearings, there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation and reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. I.G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations).

I.G.O. extreme pressure gear oil possesses excellent oxidative and thermal stability, superior rust and corrosion inhibition, exceptional load-carrying capability and excellent water-separating characteristics. I.G.O. climbs to upper and middle gears and bearings, there is no delay waiting for lubricant to reach to upper mechanisms. Superior film strength maintains better metal-to-metal separation and reduces friction; gear boxes run cooler; and less energy is drawn. Its exclusive polymer formulation prevents scoring and excessive wear. I.G.O. is non-corrosive to gears and ball and roller bearings and provides excellent anti-foaming properties. This product is recommended for the lubrication of gears (spur, hypoid, worm, spiral, bevel, helical, planetary and combinations).

IMPACT is a high-performance, heavy-duty grease that adheres to application areas at extremely high temperatures in excess of 550°F. Fortified with high-performance polymers, IMPACT clings to metal surfaces and coats them with an exclusive plating action. IMPACT's 65 Timken Load withstands high pressures and shock loads and is resistant to bleeding. Exclusive anti-wear additives provide exceptional, long-lasting performance, offers superior service for both high and low speed bearings up to 2,500 rpm and provides protection against rust, corrosion and wear. IMPACT is recommended for use in plain and anti-­friction bearings, sleeve bearings, universal joints, water pumps, wheel bearings, drive shafts, splines, chains, chassis, fifth wheels, king pins and disc brakes. It has the long-lasting stability required in mill, plant, mining, fleet and construction operations.

IMPACT is a high-performance, heavy-duty grease that adheres to application areas at extremely high temperatures in excess of 550°F. Fortified with high-performance polymers, IMPACT clings to metal surfaces and coats them with an exclusive plating action. IMPACT's 65 Timken Load withstands high pressures and shock loads and is resistant to bleeding. Exclusive anti-wear additives provide exceptional, long-lasting performance, offers superior service for both high and low speed bearings up to 2,500 rpm and provides protection against rust, corrosion and wear. IMPACT is recommended for use in plain and anti-­friction bearings, sleeve bearings, universal joints, water pumps, wheel bearings, drive shafts, splines, chains, chassis, fifth wheels, king pins and disc brakes. It has the long-lasting stability required in mill, plant, mining, fleet and construction operations.

This dielectric silicone grease is non-melting, has a high dielectric strength, low volatility and is insoluble in water, methanol, ethanol, dilute acids, caustics, glycol, glycerine, vegetable and mineral oils. LUBRO-SIL prevents rust & corrosion, is chemical resistant, has a wide temperature range and reduces wear. 

MULTI-HY is a polymer-fortified ashless hydraulic oil ideal for use in all hydraulic systems and turbines requiring premium grade oil. It is blended from premium multiple viscosity grade oils and is fortified with anti-wear, anti-rust and antioxidant stabilizers for long life protection of equipment. MULTI-HY is specially treated for maximum leakage resistance, as it remains fluid at sub-zero temperatures and maintains heavy viscosity at high temperatures. It has a special "anti-splatter" additive for splash resistance and slower "drip-off" rate under severe conditions and contains special anti-foam additives. MULTI-HY is recommended for ISO 32, 46, 68 and 100. It may be used in hydraulic systems found in heavy equipment such as earth moving equipment and tractors.

MULTI-HY is a polymer-fortified ashless hydraulic oil ideal for use in all hydraulic systems and turbines requiring premium grade oil. It is blended from premium multiple viscosity grade oils and is fortified with anti-wear, anti-rust and antioxidant stabilizers for long life protection of equipment. MULTI-HY is specially treated for maximum leakage resistance, as it remains fluid at sub-zero temperatures and maintains heavy viscosity at high temperatures. It has a special "anti-splatter" additive for splash resistance and slower "drip-off" rate under severe conditions and contains special anti-foam additives. MULTI-HY is recommended for ISO 32, 46, 68 and 100. It may be used in hydraulic systems found in heavy equipment such as earth moving equipment and tractors.

MULTI-HY is a polymer-fortified ashless hydraulic oil ideal for use in all hydraulic systems and turbines requiring premium grade oil. It is blended from premium multiple viscosity grade oils and is fortified with anti-wear, anti-rust and antioxidant stabilizers for long life protection of equipment. MULTI-HY is specially treated for maximum leakage resistance, as it remains fluid at sub-zero temperatures and maintains heavy viscosity at high temperatures. It has a special "anti-splatter" additive for splash resistance and slower "drip-off" rate under severe conditions and contains special anti-foam additives. MULTI-HY is recommended for ISO 32, 46, 68 and 100. It may be used in hydraulic systems found in heavy equipment such as earth moving equipment and tractors.

MULTI-HY is a polymer-fortified ashless hydraulic oil ideal for use in all hydraulic systems and turbines requiring premium grade oil. It is blended from premium multiple viscosity grade oils and is fortified with anti-wear, anti-rust and antioxidant stabilizers for long life protection of equipment. MULTI-HY is specially treated for maximum leakage resistance, as it remains fluid at sub-zero temperatures and maintains heavy viscosity at high temperatures. It has a special "anti-splatter" additive for splash resistance and slower "drip-off" rate under severe conditions and contains special anti-foam additives. MULTI-HY is recommended for ISO 32, 46, 68 and 100. It may be used in hydraulic systems found in heavy equipment such as earth moving equipment and tractors.

MULTI-HY is a polymer-fortified ashless hydraulic oil ideal for use in all hydraulic systems and turbines requiring premium grade oil. It is blended from premium multiple viscosity grade oils and is fortified with anti-wear, anti-rust and antioxidant stabilizers for long life protection of equipment. MULTI-HY is specially treated for maximum leakage resistance, as it remains fluid at sub-zero temperatures and maintains heavy viscosity at high temperatures. It has a special "anti-splatter" additive for splash resistance and slower "drip-off" rate under severe conditions and contains special anti-foam additives. MULTI-HY is recommended for ISO 32, 46, 68 and 100. It may be used in hydraulic systems found in heavy equipment such as earth moving equipment and tractors.

PREP-A-LUBE is a red spray grease with penetrating action. It removes grit, grime and old grease when applied and cures to a thick, high-temperature, pressure-resistant coating that protects and lubricates equipment. It also resists acids, oxidation and dirt and water wash-out and prevents corrosion. It operates under temperatures from -40°F to +500°F. PREP-A-LUBE is recommended for wire rope, conveyor chains, chassis, linkages, draglines, water meters, valves, fittings, threads, pulleys, fork lifts, rollers, presses or anywhere a penetrating grease is required.

PURE and SIMPLE is completely odorless and non-toxic, making it the ideal lubricant for use in areas where it may come in contact with foods in process.  PURE and SIMPLE is classified aerosol and bulk (H1) by NSF and is accepted as a lubricant with incidental food contact in food processing areas. It helps reduce downtime because it can be applied to machinery while it is running. It effectively penetrates into hard-to-reach, "danger" areas such as pulleys, conveyors, rollers, etc., and helps protect valuable machinery against destructive rust and corrosion. It contains no silicones, waxes or greases that produce greasy build-up and remains stable under a wide range of temperatures and conditions, as it maintains superior lubrication up to 350°F. PURE and SIMPLE is widely used by food processors, dairies, breweries, bottlers, meat plants, bakeries, canneries, cafeterias, restaurants, hospitals, supermarkets or in all applications where a food-safe, non-toxic lubricant is required. PURE and SIMPLE may be used for all types of "open" lube points such as chains, open gears, bearings, slides, rollers, conveyors, cones, sprockets, plungers, grid belts, stirrups and casters.

RELEASE II is a fast-acting, high oil content aerosol that penetrates, displaces moisture and lubricates by utilizing both Teflon and molybdenum disulfide. RELEASE II is low in toxicity, harmless to most rubber and plastics and is heat resistant up to 500°F. • Penetration: it possesses excellent penetration power for loosening frozen and rust corroded parts. • Moisture Displacement: RELEASE II quickly displaces moisture from ignition systems. It also protects against corrosion on unpainted surfaces. It stops and prevents corrosion on battery terminals, chrome trim tools and all metals. It also removes moisture from distributor caps, ignition wires, starter motors, spark plugs and generator alternators. • Lubrication: RELEASE II loosens and lubricates nuts, bolts, mufflers, manifolds, heat risers, control cables, brakes, U-bolts, tie rod connections, electric switches, electric motor rods, panel hinges, rubber bushings, throttle controls, carburetor linages, sewing machines, electrical appliances, mowers, workshop equipment and much more!

SEAL-A-THREAD is a premium, synthetic, food grade, non-drying thread sealant and anti-seize lubricant. It is formulated with a balanced blend of PTFE (fluorinated lubricating compound) and other lubricating solids, homogenized into a non-melting grease carrier. SEAL-A-THREAD is NSF/U.S.D.A. H1 Registered and Kosher approved which gives full acceptability for use in all areas where incidental food contact may occur.

SET-UP is a high-pressure clear penetrating lubricant with PTFE.  It easily penetrates tight areas by initially going on thin and immediately forming a viscous clear grease. SET-UP stays put once applied and provides excellent lubrication on hinges, open gears, wire ropes, cables, chains, conveyors and much more.

SLIP-N-SLIDE is a high-temperature, extreme pressure anti-seize lubricant, sealant and protective coating. It withstands extreme heat up to 2,000°F and is especially recommended for applications in a sustained temperature range from -40°F to +750°F. It contains synthetic oil and extremely fine aluminum and graphite particles. SLIPE-N-SLIDE may be used by construction companies, industrial plants, manufacturing facilities, machine and automotive shops, DOTs and waste water treatment facilities on the following items: all threaded fittings, including all nuts, bolts and screws; hand and motor operated valves; gaskets, flanges and 'O' rings; bushings, bearings, rollers and conveyors; gears, transmission boxes, chains and drives; electric motors, compressors, hoists, turbines and winches; furnaces, burner assemblies, regulators, pumps, valve stems, control chests and headers; cylinder heads, manifold and stud assemblies; fuel injectors, pre-combustion chambers, valve cages, turbo-charger fittings, guides and thread tubing; keyways and spark plugs; torque rod pins and tubes; air cylinder assemblies and pneumatic cylinder shafts; sheet excursion dyes; heat plates; wing blades; spreader chains; reel mowers; air slides; and axle shafts.

SRO ashless industrial oil is designed for long-lasting performance in a wide temperature range. High operating temperatures can mean oxidation of conventional oils, resulting in lubrication breakdown and damage to equipment. SRO is the most advanced blend specially formulated with high-viscosity index based oils and anti-wear additives to give excellent temperature and oxidation stability, while providing maximum protection of industrial equipment from corrosion damage. SRO provides superior protection against emulsification, as it will not mix with water.

SRO ashless industrial oil is designed for long-lasting performance in a wide temperature range. High operating temperatures can mean oxidation of conventional oils, resulting in lubrication breakdown and damage to equipment. SRO is the most advanced blend specially formulated with high-viscosity index based oils and anti-wear additives to give excellent temperature and oxidation stability, while providing maximum protection of industrial equipment from corrosion damage. SRO provides superior protection against emulsification, as it will not mix with water.

SRO ashless industrial oil is designed for long-lasting performance in a wide temperature range. High operating temperatures can mean oxidation of conventional oils, resulting in lubrication breakdown and damage to equipment. SRO is the most advanced blend specially formulated with high-viscosity index based oils and anti-wear additives to give excellent temperature and oxidation stability, while providing maximum protection of industrial equipment from corrosion damage. SRO provides superior protection against emulsification, as it will not mix with water.

SRO ashless industrial oil is designed for long-lasting performance in a wide temperature range. High operating temperatures can mean oxidation of conventional oils, resulting in lubrication breakdown and damage to equipment. SRO is the most advanced blend specially formulated with high-viscosity index based oils and anti-wear additives to give excellent temperature and oxidation stability, while providing maximum protection of industrial equipment from corrosion damage. SRO provides superior protection against emulsification, as it will not mix with water.

SUPERFILM ashless compressor oil is a multi-purpose lubricant with superior performance capabilities for reciprocating/rotary type air compressors that operate under normal to extreme load and temperature conditions. Full lubrication protection is provided by the combination of a high-quality, paraffinic petroleum base oil and selected additives. SUPERFILM utilizes very high viscosity index base oils. The performance of this product is further improved with the addition of high viscosity based oils, rust, oxidation and corrosion inhibitors, ashless anti-wear and anti-scuff agents, an anti-foam agent and a pour point depressant. Special additives in SUPERFILM eliminate foam which traps heat and causes compressors to run hot. This product also has excellent water separation qualities, as it resists mixing with water, even at high operating temperatures.

TEMTROL is a high-temperature, extreme pressure, anti-seize lubricant and sealant packaged in a unique brush-on container for use on all threaded parts and gaskets. TEMTROL assures long-term protection with one application indoors or outdoors. It is non-melting and will not fuse to metals. This product is non-corrosive and inert to most natural and synthetic rubbers and actually reduces rubber deterioration from metal-to-rubber contact. TEMTROL may be used in marine, aircraft, automotive, heavy equipment and other metal-working industrial applications and on engines, exhaust systems and machinery to prevent seizing on bolts, fittings, flanges and gaskets.

T-FLEX is non-oily, all-purpose dry lubricant made with an extremely fine PTFE powder.  It features outstanding microscopic film-forming properties and resists temperatures from -100°F to+500°F. T-FLEX leaves a coating that is odorless and stainless and far more slippery than silicone, graphite or oil. It is ideal for lubricating locks, sliding glass door tracks, bus windows, drawer slides, pulleys, saw blades, hinges, molds for plastic or fiberglass, cutting tables and chain drives. T-FLEX is compatible with rubber, metal, wood, plastics, glass and fiberglass.

THE BUSTER features a forceful jet spray and a powerful penetrating and lubricating catalyst which helps rapidly dissolve rust and corrosion to free frozen parts. It reduces friction and wear over a broad temperature range. THE BUSTER creeps and pulls itself up, around and into cracks and crevices and threads with powerful capillary action. This product is excellent to use on bearings, gears, relays, lug nuts, threaded parts, linkages, fasteners, pulleys, frozen nuts and bolts, locks, hinges, screws, clamps, tools, engine parts, motors, starters and generators. (Not to be sold in California)

ZIP is an aerosol spray lubricant that protects all moving metal surfaces from metal-to-metal contact. It forms a protective water-resistant coating to prevent corrosion and reapplies itself with each revolution of the lubricated part. ZIP penetrates into gears and cables where it sets and bonds a shield to parts to maintain a cushion of lubricant between gear teeth and other friction-producing surfaces. It absorbs high shock loads, and prevents chipping and scuffing. ZIP will not wash off, dry out, crack or peel. This product may be used on passenger and freight elevators, drag lines, construction, mining, dredging and earth moving equipment and offshore drilling rigs, snow removal equipment or wherever an underwater lubricant is needed.